Loading Originals on Platen

1. Open the document cover.

2. Load original WITH SIDE TO SCAN FACING DOWN on platen.

   Align the corner of the original with the alignment mark .

   • Supported Originals
   

   Important

   • Be sure to observe the following when loading the original on the platen.

     Failure to observe the following may cause the scanner to malfunction or the platen glass to break.

     • Do not place any objects weighing 4.4 lb (2.0 kg) or more on the platen glass.

     • Do not put any pressure of 4.4 lb (2.0 kg) or more on the platen glass, such as pressing down the original.

   • The printer cannot scan the striped area (A) (0.04 in. (1 mm) from the edges of the platen glass).

     

3. Close the document cover gently.

   

Important

• After loading the original on the platen, be sure to close the document cover before starting to copy or scan.